How aluminum anodizing works, coating thickness choices, masking strategy and dimensional impact on machined parts.
(Content in this language is being translated. Showing English version.)
Anodizing is the default surface finish for aluminum CNC parts - but Type II vs Type III, clear vs black, and masking choices all affect performance and price.
Type II vs Type III
Type II (decorative) builds a 5-25μm layer, ideal for appearance and moderate corrosion resistance. Type III (hard anodizing) builds 25-100μm for wear resistance - common on drone parts and hydraulic components.
Color and Masking
Clear, black, and custom colors are dyed into the porous oxide layer. Bearing bores and threaded holes usually need masking - specify masked surfaces upfront to avoid rework.
Dimensional Impact
Anodizing grows the part dimensionally: roughly half the coating thickness is added to each surface. For tight bores, tell your supplier the post-coating tolerance you need.