1) Safety operation rules that need to be checked before hardware processing.

Before mechanical work, check whether the moving part is filled with lubricating oil, then start and check whether the clutch and brake are normal, and run the machine machine for 1-3 minutes, it is strictly prohibited to operate in case of mechanical failure.

2)  Safety operation rules that need to be paid attention to in hardware processing.

In mechanical work, it is forbidden to extend your hand into the working area of the slider, and it is forbidden to take or turn off parts by hand;When taking and cutting parts in the die, the tools must be in accordance with the standards. If the machine is found to have abnormal sound or machine failure, the power switch should be immediately turned off for inspection.After the machine is started, one person shall carry the material and operate the machine. Other people shall not press the electric building or step on the pedal switch board. For the safety of others, one shall not put the hand into the machine working area or touch the moving part of the machine by hand.

3) Safety operation rules for starting the machine.

Must wait for other personnel to leave the mechanical work area, and take away the sundries on the workbench, before starting the power supply to start the machine.

4) Safety operation rules to be paid attention to when replacing the mold. 

When replacing the mold, first turn off the power supply. After the press movement department stops working, the mold can be installed and debugged. After the installation and adjustment, use the hand to move the flywheel to test and punch twice, in order to avoid unnecessary collision between the machine and the product to be processed, the upper and lower molds must be checked to see if they are symmetrical, reasonable, screw is firm, edge ring is in a reasonable position.